公司简介 产品中心 技术园地 资料下载 招聘信息 联系我们
无 线 接 入 设 备 产 品 中 心

CDMA无线商务话机

BH-CT388

C20商话
(800M、450M、1.9G)
中文资料


C20 FWP
(800M、450M、1.9G)
Technical Specifications

MG825无绳商话
中文资料


MG825 Cordless Phone
Technical Specifications


GSM无线接入台

BH-GB288A

BH-GB288B

BH-GB288C


CDMA无线接入台

BH-CB288A

BH-CB288B

BH-CB288C

CDMA无线上网卡

BH-W998


C20 CDMA1x Fixed Wireless Phone

 

    C20 is a type of CDMA(ZTE) fixed wireless terminal product,provides voice and SMS service with higher reliability and quality. This series includes 800M, 450M and 1.9G terminals, we use 800M as example in this document

Basic Functions:
Emergency call Make a call
Receive a call Incoming call display
Redial Hand-free cal
Delay number send Silent mode
MIC silent mode Incoming call lis
Outgoing call list Missing call list
Date/time Alarm clock set
Call waiting Packet data
Support 16kHz/12kHz pulse billing
Advanced Functions:
1.Call forwarding  (Network support required)
2.Three-way calling  (Network support required)
3.Call waiting  (Network support required)
4.Ring volume is adjustable
5.Keystroke volume is adjustable
6.Handset volume is adjustable
7.Sending/receiving SMS  (Memory capacity: receiving and releasing 20 messages respectively)
8.Packet data  (This function is optional)
9.Asyncronous data/fax
10.FM radio (This function is optional)
11.Supporting R-UIM card or not is optional (UIM-card voltage is 3v)/
12.Phone book (100)
Technical Specifications of C20 Host
Communication Protocols and Technical Indices:
Mode of access CDMACode-Division-Multiple-Access
CDMA protocol IS-95A/BIS-98A/DIS-126IS-637AIS-707AIS-2000
Data rate 153.6Kbps Max
Interval between transmitting and receiving frequency 45MHz for 800MHz Cellular
Voice coding 8kEVRC
RF Receiving:
Frequency Range 869 894MHz
RX sensitivity -104dBmFER ≤ 0.5%)
Range of receiving signal -104dBm -25dBmFER ≤ 0.5%)
Interference resistance FER≤1.0%(-101dBm/BW,-30dBm@􀙛 ±900KHz
Intermodulation spurious response attenuation FER≤1.0%(test1-101dBm/BW ,+900/+1700KHz-43dBm
FER≤1.0%(test2-101dBm/BW ,900/-1700KHz-43dBm
FER≤1.0%(test3-90dBm/BW,+900/+1700KHz-32dBm
FER≤1.0%(test4-90dBm/BW,-900/-1700KHz-32dBm
FER≤1.0%(test5-79dBm/BW ,+900/+1700KHz-21dBm
FER≤1.0%(test6-79dBm/BW ,-900/-1700KHz-21dBm
Conducted spurious emission <-76dBm/1MHz869 894MHz
<-61dBm/1MHz824 849MHz
<-47dBm/30KHzother frequencies
Demodulation of forward channel under additive white gaussian noise FER≤3.0%(test1Rate Group19600bps
FER≤1.0%(test 2Rate Group 19600bps
FER≤0.5%(test 3Rate Group 19600bps
FER≤1.0%(test 4Rate Group 14800bps
FER≤1.0%(test 5Rate Group 12400bps
FER≤1.0%(test 6Rate Group 11200bps
FER≤3.0%(test 7Rate Group 214400bps
FER≤1.0%(test 8Rate Group 214400bps
FER≤0.5%(test 9Rate Group 214400bps
FER≤1.0%(test 10Rate Group 27200bps
FER≤1.0%(test 11Rate Group 23600bps
FER≤1.0%(test 12Rate Group 21800bps
RF Transmitting:
Frequency range 824 849MHz
Max frequency deviation ±300Hz
Max power 23dBm 30dBm@-104dBm
Min output power < -50dBm@-25 dBm
Code domain power The code domain power of each unactivated sub-channel is at least 23dB lower than the total output power measured at I-and Q-channel
TX timing error ±1.0µs
Wave form quality >0.944
Open loop power test1:-25dBm/1.23MHz)-48dBm/1.23MHz􀙛 ±9.5dB
test2:-65dBm/1.23MHz)-8dBm/1.23MHz􀙛 ±9.5dB
test3:-93.5dBm/1.23MHz20dBm /1.23MHz􀙛 ±9.5dB
Closed loop power  ±24dB(9600bps data rate)
 ±24dB(4800bps data rate)
±24dB(2400bps data rate)
±24dB(1200bps data rate)
Conducted spurious emission -42dBc/30KHz -54dBm/1.23MHz|Δf|:885KHz1.98MHz
-54dBc/30KHz -54dBm/1.23MHz|Δf|:1.98MHz4.00MHz
<13dBm/1KHz|∆f| > 4MHz, 9KHz < f < 150KHz
<13dBm/10KHz|∆f| > 4MHz, 150KHz <f < 3 0MHz
<13dBm/100KHz|∆f| > 4MHz, 30MHz < f < 1GHz
<13dBm/1MHz|∆f| > 4MHz, 1GHz < f < 5GHz
Antenna:
Frequency bandwidth TX:824MHz849MHz     RX:869MHz894MHz
Voltage standing wave ratio < 2.01
Gain 1±1dBi
Input resistance 50Ω
Polarization form Vertical polarization
Power Supply:
Power supply by adapter 5.2VDC ~ 4.9VDC
Power supply by battery 4.2VDC ~ 3.3VDC
Max.Power consumption 3.8W
Typical power consumption during talk 1.6W  (Signal strength is80dBm)
Power consumption in idle mode 0.12W (Signal strength is80dBm)
Working Condition:
Working temperature -10 + 55
Storage temperature -20 + 70
Humidity <95%
Reference:
1、C.S0011-A Recommended Minimum Performance Standards for CDMA2000 Spread Spectrum Mobile Stations
2、TIA/EIA/IS-95-A Mobile Station-Base Station Compatibility Standard for Dual-Mode Spread Spectrum Systems
3、TIA/EIA/IS-127 Enhanced Variable Rate Codec, Speech Service Option 3 for Wideband Spread Spectrum Digital Systems
4、TIA/EIA/IS-637 Short Message Services for Wideband Spread Spectrum Digital Cellular Systems
5、TIA/EIA/IS-657 Packet Data Services for Wideband Spread Spectrum Digital Cellular Systems
6、TIA/EIA/IS-820 Removable User Identity Module (R-UIM) for Spread Spectrum Systems
7、TIA/EIA/IS-2000-1 Introduction to cdma2000 Standards for Spread Spectrum Systems
8、TIA/EIA/IS-2000-2 Physical Layer Standard for cdma2000 Spread Spectrum Systems
9、TIA/EIA/IS-2000-3 Medium Access Control (MAC) Standard for cdma2000 Spread Spectrum Systems
10、TIA/EIA/IS-2000-4 Signaling Link Access Control (LAC) Standard for cdma2000 Spread Spectrum Systems
11、TIA/EIA/IS-2000-5 Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems
Material ABS (Acrylonitrile Butadiene Styrene)
Dimension 190mm×170mm×48mm(Excluding antenna)
Weight <700g(Weight of Main unit
Power Socket 5V DC input
Data port interface

System connector socket
1005-0018-300//MQ187-18P//MB0004-01

Phone interface RJ114-PIN(Connected with the receiver)
Antenna interface TNC-female
A Complete Set of Product:
NO. Name(Model) Q’ty Remark
1 Host(C20) 1 LCD (128×64)
2 Antenna 1 2dBiTNC-M
3 Handle 1
4 Handle cable 1
5 Power Adapter 1
6 Lithium-ion battery 1 1200mAH,in FWP
7 Serial data cable(RS232/DB9) 1 Optional
8 USB data cable 1 Optional
9 User’ Manual 1
10 Product Certificate 1
11 Package Bill 1
  

 

深圳市博恒科技有限公司 版权所有©